Rear Exhaust Air Wet Water Stone Polisher Pneumatic Angle Grinder

• Customization: Available
• Grade: a
• Certificate: ISO9001
• Model NO.: PAG2
• Specification: M14, 5/8-11
• Trademark: Z-LION
• Origin: China
• HS Code: 84671100
• Production Capacity: 1000PCS/Month

Product Description

Product Description

Name: Rear exhaust air polisher/ Pneumatic wet polisher

Air consumption	16cfm (0.45m³/min)	Shaft thread	5/8-11, M14
Air pressure	90Psi (0.62MPa)	Air Inlet	1/4" Npt
Variable speed	0 to 5500 RPM	Max pad diameter	5"

Description:

Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that could cause machine failure.

the air pressure should normally be maintained at90PSI~116PSI(0.62MPa~0.8MPa).

Always supply adequate water during operation.

To avoid machinery failure during operation, make sure the machine is filled with 10# oil before operation.

When grinder will stop working, especially if it will be not used for a period of time, the machine should be well oiled and rotate for almost five seconds without loading before off it, this is a supper important step to avoid rusting

 

During using:

1.Compressed air should be dry and cool, as high-moisture air will lead to internal rusting that cause machine failure.

2.The air pressure should normally be maintained at 90 PSI-116 PSI(0.62MPa~0.8MPa)

3.Always supply adequate water during operation.

4.To avoid machinery failure during operation, make sure the machine is filled with 10# oil before operation.

5.When grinder will stop working,especially if it will be not used for a period of time, the machine should be well oiled and rotate for almost five seconds without loading before off it, this is a super important step to avoid rusting.

6.Machine should be well oiled to prevent rusting especially after a period of non use.

7.To prevent rusting, always check that there is special-purpose oil in the machine.If the machine is not functioning properly, manually spin the sander.

8.Prevent any rust into rubber connection.

 

 

Detailed Photos

 

Certifications

Company Profile

Z-LION DIAMOND TOOLS GROUP / Xiamen ZL Diamond Technology Co., Ltd. is a professional diamond tool manufacturer. Our main products include diamond cutting blades, grinding wheel, polishing pads, core drills, diamond wire saw, etc. Our products are used for cutting, grinding
polishing and drilling of stone, ceramics, glasses and concrete.

FAQ